Ailite Electronic Appliance Development co., Ltd
Contact: Gao Lun
Tel: 0760-86332248 86388816
Mobile: 18928133656 13702532243 Gao Lun Hao
Ali website: https://zsailite8.1688.com
Address: 1.2.3 Floor, No. 3, Street, Yagang Industrial Zone, Sanxiang Town
The temperature changes are impermanent, and the dehumidification of intelligent moisture-proof cabinets has been paid more and more attention by households and electronic industrial units. The moisture-proof cabinets have become the best choice for moisture-proof and dehumidification because of their convenient installation, rapid dehumidification and so on. The application in it is also getting wider and wider. Such as imaging materials, photographic equipment, digital electronic products, stamps, high-end collectibles, electronic chips, silicon electromagnetic, pharmaceuticals, optical supplies and other wet items, and solar energy industry, electronics industry, university research institutes and so on. However, as an electronic product, the moisture-proof cabinet also needs normal maintenance and maintenance. Here is a brief introduction for everyone. The maintenance of the moisture-proof cabinet should be paid attention to.
1. The intelligent moisture-proof cabinet shall be placed on a level solid surface with no debris around it, and the wall shall not be less than 30cm.
2. Place the partition inside the cabinet to prevent the items according to the load-bearing range of the laminate.
3. Do not put in the direction of airflow, such as air conditioning outlets, high temperature places.
4. Do not place in direct sunlight, smoke, or water vapor.
5. Connect all power cords in the order of the numbers on the power plug, then plug in the power (220V/50HZ).
6. Humidity can be set to adjust the ““ ” and “ ↓ ” buttons to adjust the humidity to the required value.
7. If it is used for the first time or after being used for a long time, it should be used for more than 12 hours in the empty cabinet, and the humidity should be reduced to a lower level.
8. If there is any stain on the air outlet of the dehumidifier, please wipe it gently with a clean towel. Do not use a wet towel or water. If the air outlet is seriously blocked by the stain, please call the after-sales service (021-64012468) to help you.
9. Photographic moisture proof cabinets should be cleaned regularly. When cleaning the moisture-proof cabinet, first unplug the power plug, wipe the inner and outer surfaces of the moisture-proof cabinet with a clean alcohol cloth, and do not use water to wash the moisture-proof cabinet. If you are using a scrub, wipe the detergent with a clean, damp cloth. Always wipe dry with a dry cloth. When cleaning, be careful not to hit the dehumidifier and the humidity detector.